This is for a full 10-Light glove set with new batteries with the housings and gloves of your choice.
The new ArcLite Galaxy chip is one of our newest chips which was designed to be used in our Galaxy Orbit. However, after using them inside a glove set we realized the modes work well for a glove light show too! There is a DEMO mode (Mode 1) which is really useful because it automatically changes modes every 7 seconds! You can reprogram all the modes to a different set of colors and then leave it in mode 1 to give an awesome mode changing effect without actually having to click to change the modes while you're giving a lightshow!
This is a great glove set if you want other modes (10 Modes) that aren't in any other glove set on the market and at a resonable mid-price range.
IN-STOCK, SHIPPING NOW!
Available modes to program:
Demo Mode (Changes modes every 7 seconds)
Sandbox mode (up to 6 colors)
Hyper Strobe (up to 6 colors)
Ribbon (up to 6 colors)
Tracer (up to 6 colors)
Dots (up to 6 colors)
Dash Dot (up to 6 colors)
Slow Fade (3 colors)
Rainbow Strobe (3 colors)
Rainbow Ribbon (3 colors)
*Recommended Housing: ArcLite 2.0 (This is our latest 2016 housing and features a two piece design with a rubberized soft-touch finish!)
*Get creative by programming blanks instead of colors which could dramatically change the way the chips look and perform. For example, choose Hyper Strobe and program it using 2 colors and 4 blanks to give a strobe similar to our SKY EVO-X 5th mode, OR select Ribbon and program just 1 color to make a solid mode. There are so many different ways to program colors + blanks so try different combinations.
*December 2015 Update: When you receive your chips, you will notice that there are new colors added for a total of 28 color options and that each mode has already been pre-programmed with different colors. We are no longer using RGB as the default colors for each mode.
How to program:
*NEW* Easier Programming!
Simply click once to turn on the light. Each single click changes to the next mode. When you find the mode you want to change the colors on, simply press and hold until it turns to low-power blue. You are now in programming mode.
Now click until you see your desired color. Press and hold down to see the three brightness levels for that color. Simply release the button on the brightness you want. You have just programmed your first color and brightness for that mode! Now, you can program the low-power blue to end programming or simply click through to the next color. You can program up to 6 colors for each mode.
Remember: You can program a BLANK instead of a color to add a space. You can get creative by adding multiple BLANK spaces to extend the strobe frequency. The BLANK counts as 1 of the 6 colors.
When you are done programming, your colors and brightnesses will be saved in memory even if you remove the batteries.
How to do a master reset (return to factory defaults):
In the off position. Press and hold the power button down for about 5 seconds. The chip will then blink 3 times to confirm that all memory banks have been reset. The chip will then turn off and back on with the factory colors.
Turning off the chip:
When you are done using the light, press and hold down for 1 second to turn it off.