This Modified Inova is like our popular Tri-Color Keychain light during High Power mode. In DOT mode, it will dot RED, GREEN, and BLUE at the same time producing a very unique dotting effect!






The INOVA light is very popular and need not much of a description. Pair these up inside some gloves, or as an additional light to an orbit, and start dottin' your way around the rave impressing everyone around you!

• 6 Colors in 1: Red, Green, and Blue (plus Cyan, Magenta, and Yellow! alternating, color changing, & strobe-like effect)

How do you get so many colors from this INOVA?
Tri-color / Rainbow modified INOVA lights only emit Red, Green, & Blue (RGB) but how is it that in my videos you see purple, yellows, & oranges? The concept is actually quite simple, when one or two colors mix, they produce other colors; Here are some images to help understand the concept better...


So, when the tri-color keychain lights are spinning rapidly and changing between the RGB values, they mix producing purples, oranges, yellows! =)
Product Highlights

Four Functions:

o High power
o Low power
o Strobe
o Signal mode

- Temperature Operation Range from -20° to +40°C
- Easy-Open/Snap-Shut Construction for effortless battery replacement
- Durable Stainless-Steel Universal Clip
- Limited Lifetime Warranty USA

TO ACTIVATE YOUR MICROLIGHT FOR THE FIRST TIME:

Press and hold down the button for 15 seconds until the light goes out.

OPERATION GUIDE

Press the button one time for high power
Press the button two times for low power
Press the button three times for strobe

If you leave your Microlight on any setting for more than 2 seconds the next press of the button will turn it off and not go to the next function.

In the high power setting your Microlight will automatically shut off after 4 minutes. Low power and strobe settings will run as long as they are active.

To reset your Microlight into signal mode:
Press the button three times for strobe mode.
While the light is strobing, press and hold the button for 5 seconds.
In signal mode your light will only work as a squeeze light.

To activate normal operating modes press and hold down the button for 15 seconds until the light goes out.